CAMERA Digital has become a common tool found in every family, all of it is because the cheaper price and more and more brands and variations of its features. But there are still many people who lack schools of how to use. And not a few also who do not know how to care for his digital camera to avoid
damage and long-lived. Camera care tips in order to function properly and the maximum and long-lived
1. Put all the equipment / peripherals that are part of your camera into 1 bag. Typically for a medium-class cameras are not accompanied by a downward bias bag hold all your camera accessories, so you have to buy their own. Usually the camera equipment is a memory, battery, lens for SLR type, tripod, and charger. The complexity of equipment depends on your photographic activity field.
2. Use a bag that is designed to accommodate your camera equipment. This is to avoid excessive shock to the bias caused your camera lens scratched or damaged one of your camera device. Usually, these bags fit the bias of each store with accessories and your camera, so the camera and its accessories will be safe from shocks and dirt. If you often perform hunting activities in the open (adventure), should look for a waterproof bag.
3. Do not forget to always put a protective lens when you are not activities with your camera.
4. Always clean your camera lens with a soft cloth. Usually sells cameras store this cleaning cloth and cleaning fluid. Autofocus, exposure, and the viewfinder also waib cleaned for optimal use.
5. Your camera like a medium temperature, so not too cold nor too hot. We like it? I wish continued good, fit and hold … In anticipation of the extreme temperatures, digital camera needs to be protected. Protect your camera with a towel or similar cloth towel bright moment under the sun. For the situation cold and wet camrea protect your coat or waterproof parasites. Kayak ball field photographers were times when the rain …
6. Avoid the camera from excessive shock. How, for example by putting the camera in a special bag with a protective foam on the surroundings. Usually, these bags also have a baffle-screens that can be removed. It is necessary to avoid excessive shocks to the external environment and the collision between equipment. The camera is not humid, it’s good if you put the silica gel on the inside of the camera bag.
7. Avoid direct contact with sunlight. Keep your digital camera should not get sunburned or direct sunlight and excessive. For tinggidapat heat damage camera parts made of plastic and rubber as well as other electronic components.
8. Clean the camera and lens. Camera should be cleaned once a week or regularly and periodically. For the physical part of the camera using a dry cloth bersihdan not rude. While the inside and small elements, use a blower or blower that many cameras sold store.
9. Avoid scratches on the lens. To avoid scratches, the lens should have a filter installed permanentdibagian screw him. A common filter is a kind of protector UV filter (ultraviolet) or filter skylights. Meanwhile, to avoid scratches on the back lens bodycup try to always put the lens cap removed from the camera body.
10. We did shoot in the coastal areas, to avoid the possibility of the camera from sea spray, or even to splash in it because the sea water can cause corrosion potential of the camera. Is obligatory to clean the camera immediately after use mugkin in coastal areas due to sea water vapor typically often leave salt crystals that cause rust on the camera.
11. Do not be too often clean the lens or clean the inside if moldy. Because the glass lenses are so sensitive. For more frequent cleaning may also result in poor picture quality.
12. Do not store it in the closet. Because it can invite fungus attached to the inside of the camera lens.
13. Avoid Kapur Barus. Never store the camera in the closet or cupboard that has filled any camphor or camphor fragrances, clothing. Because camphor is the most potent destroyer of the camera, which can wipe wipe the camera and other camera-based rubber. In the electronic camera can damage the camphor on line PCB (printed circuit board) which is where the chips mounted camera and some elements of the chip itself. Even camphor vapor can also stain and make a fence on the lens.
Posted by cahsiji